Tag: zn-lite

IC-705 Stand

I bit the bullet and ordered an Icom IC-705. It really was a no-brainer for me as I already have several Icom radios. I have had other brands, but I keep going back to Icom. Anyhow, once I got the radio I needed a stand to keep it tilted at the right angle. There isn’t a whole lot out there. The commercial stands are rather pricey, and the 3D printed versions are nice but my son’s 3D printer is down for maintenance and upgrades.

I had a $30 gift card from Tractor Supply I received for Christmas, so off I popped. The stand is made from 1/16″ thick, 1″ x 1″ angle aluminum cut to 2″ long. I got a 48″ piece for 10 bucks. While there I picked up some M4 x 10 machine screws and some M4 washers (about another 2 bucks. Icom gives you the dimensions for all the mount holes in their manual.

I cut it to length, drilled the holes and then did a nice deburr on it. Needle files and a Dremel work great here. I then lightly sanded the whole piece and cleaned it with non-chlorinated brake cleaner (great stuff and cheap at any auto parts store).

The next step was a coat of primer, in this case zinc chromate, a throw back to my Army Aviation days, followed by a coat of high temperature flat black. It’s what I had on hand.

Finally, I added a clear coat and let it sit over night. Here is the final product installed on the IC-705.

It was a fun little project and only took a couple of hours time. The 705 sits back on that angled section at the back of the radio — perfect. I found a padded telephoto lens case that should fit it just fine for about 20 bucks. I’ve taken Icom radios to the field before and they hold up well. I’ve made some CW contacts from home and the radio works as well as my other Icoms. I made out to California and up into NY. I am looking forward to getting this in the field.

N3ZN ZN-Lite II

I like paddles — a lot. Sometimes I feel I am drawn to them like a moth to a flame. You can only use one at a time but isn’t variety the spice of life? To be sure, I’m no speed demon at the paddles nor am I 100% accurate, but I am passionate about CW, and surely, that counts for something. Pictured here is one of Tony’s, N3ZN’s creations. It is his ZN-Lite II and while it is not the lightest paddle on the market, it is near the top and it is a well built machine. By itself, it tips the scales at about 4.5 ounces with the attached cable. Add the plastic base and the weight is still less than 6 ounces.

The paddle itself is well built and the action is smooth. The adjustments are generous and precise. Once set up the way you like it, I found it is pretty easy to switch over from another paddle. In other words, going from your desk paddles to these is pretty easy.

On the bottom of the paddles, there is an 8-32 screw hole. This can be used to attach the paddles to the base of your choosing such as a flight deck.

The ZN-Lite II also comes with a plastic base. Here is how I like to attach it.

In use. While I am writing this I am using the paddles to make POTA contacts. Because the paddle is light, it takes two hands to use it. One to hold the paddle and one to operate it. For portable operation, I found the best way to use them is either attached to a flight deck or on a flat surface such as a picnic table. Trying to grab it fist style interferes with the paddle levers and while you can hold it by its sides, well, it just wasn’t for me. Here is a picture of how I use these paddles.

In general, I found the paddles fun to use. When your doing something for fun, fun counts. I appreciate the precision and quality that went into these paddles. They are durable enough to be knocked a around bit in a pack (don’t run them over with your car). Where do they fit? I think these paddles are great for portable operations. In my way of thinking they would work for POTA activations or even Field Day. They would excel for those who wish to travel light and fast. An Example might be POTA RADAR (Rapid Deployment Amateur Radio). I think for SOTA there are better options out there as operators are often holding their paddles fist style in their hands. However, these may work well if someone devised a leg strap for them. Here is a YouTube video I did for these paddles.

Overall, I like the paddles, they are currently sitting on my desk and I am making contacts with them. They have a good feel, and enough of a fun factor to keep them in the rotation (I never thought I would say that). I have exchanged a few emails with Tony and he has always been responsive and helpful. If you want to find out more about Tony’s paddles, here’s a link: https://www.n3znkeys.com/