My Ic-7100 rides with me in the truck. I have it hooked up to an AH-730 and a 102″ whip. I also have a 60′ wire with insulators and an alligator clip on one end. I can attach this to the whip and make a very effective NVIS/medium range antenna.
I really like the 7100 except that I was having RFI problems. I read where the cable between the control head and the radio was not shielded well so I tried some CAT8 ethernet cable. It worked great once and I couldn’t get it to work again. so I switched to plan B. I added some ferrite cores to both ends of the cable and that solved it up to 75 watts. I still get a little RFI interference at 100 watts but I rarely operate above 50 watts mobile/portable so I am good to go.
The other thing I wanted to do was make the radio easier to detach from its tray. I have some desks that I can put over the center console for laptops, notebooks, etc, but they cover up the radio. So off to TSC for some hardware. This is what I came up with.
The knob fits under the tray and makes it easier to unscrew the control head from the tray. I have about 5′ of cable to move the head around, enough for what I want to do. Installed, it looks like this.
I am glad I got the RFI problem sorted and made the head easier to remove. I also have another cable so I can now get the control head outside of the truck and on a folding table if that’s what I want to do.
Marching to the beat of a different drummer.
I know I do a few things differently. Many POTA activators use small QRP radios or compact radios like the FT-891 when they activate. That’s not me. I have always had a foot in the EmComm world and I enjoy working weak signals. There’s an art to catching the weak ones and it takes a good ear. It also takes skill in operating your radio. I like to have the controls I use most easy to get at like I find on radios like the IC-7300, and TS-590sg. I also like to operate low power, not QRP. I mostly find myself in the 20-35 watt range. Even at home, I am usually at 50 watts. Low power gives me enough oomph to make the contact and still makes it a challenge. Through most of my amateur radio career, I have been involved in EmComm. I use FunComm events like POTA to keep my EmComm skills sharp and my radios and antennas in good working order. Not using your EmComm gear until the “Big One” hits often brings unwelcome surprises. I know I am getting a little long in the tooth for some EmComm but old habits die hard. 73 de Scott
I have a stable of radios. I like radios. I have spent the past couple of years going through radios and finding the ones I like to use. I think I am getting close. In the shack, I like my IC-7610 and TS-890. They are big and all the controls I use are easy to get to. There performance is top notch. I am content.
QRP radios. This has been my greatest controversy. When I retired, I thought I was going to do a lot of QRP with little radios and maybe even do some SOTA. It didn’t turn out that way. I found myself using big radios at low power. They are easy to use and because of their heatsinks, they never overheat at low power. I did keep one little radio the IC-705, of all the little radios I had, the 705 was the one I grabbed the most.
Field radios. I went through a bunch of radios here too. I kept my IC-7300 which I bought new and has stayed with me over the years. I may sell it off for the new IC-7300MK2. I recently acquired a TS-590sg which went with me on my recent POTA activation at Black Rock Mountain State Park.
It was definitely a fun radio and I look forward to using it more in the future. Yesterday, an IC-7200 was delivered by UPS. The was a trade I had in the works. I always wanted an IC-7200. It’s a basic radio that has a military vibe to it. Being a Veteran, it appealed to me. The radio came with the rails and the MARS mod was already done. The radio is pristine. Power draw at idle is about 1 amp and at 20 watts it draws about 8 amps. Lowering the power level does not overly change the amp draw. Above 20 watts and the amp draw increases. Twenty watts is the happy medium. Here in the shack I had it turned on and was able to work N0SA. I have a set of his SOTA paddles from his last run before he retired. They are fun to use. I plan on taking the 7200 on my next POTA adventure.
During the past couple of years after making many POTA activations, Field Days (winter and summer), Army MARS, and SHARES I was able to shape how I operate. Some of it was a surprise as I was led in a different direction than when I started. I guess when it comes to radios, I may march to the beat of a different drummer. I prefer big radios (IC-7300 size) over little radios. I like that the controls are easier to get to and they don’t overheat. In the field I usually run around 20-35 watts. Most of the time I am in my micro-camper so I am not carrying the radios very far. I may have to lug them 50 feet to a picnic table. I recently bought one of those folding wagons so weight is no problem.
Another surprise was my use of FT8. Band conditions on many of my outings was poor. If it wasn’t for FT8, I may not have had a valid activation. Plus, I discovered I could work a lot of DX while in a park using FT8.
Yaesu’s. I don’t have any Yaesu’s. I have tried to like them, but they are just not for me. I had an FTDX10 for about 18 months, a FT-710 for about a year total, and a FTX1 for a couple of months. To me they are kind of quirky. The Icom’s and the Kenwood’s are solid performers and the ergonomics are superior. I know how to make them dance and sing. I know there are those who love Yaesu and I get it. To each his own. Find the radios that suit you best and enjoy them as I have. The journey is half the fun. 73 de Scott
Last weekend I finished up a 3-day, 1,800 mile, 7-state POTA Rove that included a radio trade. Out with the FTX1 and in with a TS-590sg. After setting up the 590, I brought it with me to Black Rock Mountain State Park to try some FT8 and if the band conditions permit, a little CW.
I arrived at the Park Friday afternoon. I have done this enough times that I am setup and ready to go within 30 minutes. This campsite had some challenges.It was the smallest campsite I ever used. I had space for the trailer and I had to park my truck in the picnic area. I also had overhead power lines so I had to use a shorter antenna. The weather was cool for a change and I didn’t have to run my A/C.
Setup was a Chameleon Micro Hybrid transformer with a 12’ whip and about a 20’ counterpoise. The radio was my new-to-me Kenwood TS-590sg. This was the radio’s maiden voyage and I really liked it. It performed well. One of the main reasons I like running big radios at low power is more of the controls are readily available. Most everything in the TS-590sg is either a push button or a twist of a knob away. Having a high performance receiver isn’t any good if you can’t get to the controls.
Band conditions were poor. The first night I only made 88 FT-8 contacts and they were a struggle. At times the band would “white-out”, high noise and only white snow on the waterfall. At the better times QSB or fading was a constant up and down. I would watch S7-9 signals drop to nothing during a QSO. Saturday afternoon brought a power failure at the park. Yep, right during mid QSO. The power was still out at 1800 hrs, so I had a decision to make – should I stay, or should I go. As you get older one of the things that goes, is your night vision. If I was going to leave it had to be soon, so I could still do most of my driving during daylight/evening hours. I decided to go. Since I have a lot of practice setting up and tearing down. I was packed up in less than 30 minutes. As I was pulling out of the park, the power returned. Better safe than sorry.
I ended up with 233 contacts, 88 short of my kilo for that park. I will plan another trip in the fall to finish. I am real happy with the TS-590sg. I opened it up and found the MARS mod already done and the TXCO installed. The radio performed well and I ran it mostly at 20 watts. As you can see in the QSO map, Most of my contacts were CONUS. Kenwoods and Icoms have the best ergonomics. I feel the layouts were designed by people who use their radios; that ergonomics were a primary concern and not an afterthought.
Screenshot
I also decided to trade off the FT-710 and ended up with a pristine IC-7200. I always wanted one but the stars never aligned — until now. I no longer have any Yaesu radios in the stable and probably won’t have any more. Why? A couple of reasons. I prefer the ergonomics of the Icoms and the Kenwoods. Everything I need is right there on the front panel. Easy, to see — Easy to use. I have owned a FTDX10, FT-710, and a FTX1, along with an Icom IC-7610, IC-7300, and a Kenwood TS-890s. I can tell you that whatever I hear on one radio, I can hear on the other. There’s two reasons for this. One is knowing where the controls are and two is knowing how to use them. There is a third factor the CSP unit, that’s Cerebral Signal Processing Unit. Half of the battle is using the CSP to process faint signals. After 30 years, mine is pretty good.
The Yaesu radios, are not bad radios, they are not my cup of tea. I can squeeze more horsepower out of the Icoms and the Kenwoods. I am sure there are those who can say the same about Yaesus. I at least crossed the fence and tried them but in the end my preference is not Yaesu. YMMV.
Other happenings. I rearranged my Go Box. My TS-590sg will not fit in it like my other radios so I got an Apache case for it from Harbor Freight and moved some antenna stuff into the Go Box. So now all my radios travel in a separate case and my Go Box has become universal. Everything I need to run any of my field radios is in the Go Box. These days I do more FunComm than EmComm, but I am always prepared to do either. I load the same stuff and off I go. I’ve had a busy summer and the honey-do list is growing, there is lots to do around the ranch so this may be one of the last trips for a while. I do most of my outdoor work from Fall to Spring to avoid working in the southeast hot, humid summers and the accompanying chiggers and ticks. That’s all for now, take care and 73 de Scott
Road Trip! I love the sound of that. I am taking an impromptu road trip north and turning it into a POTA Rove. I put my FTX1 up for trade on QTH.com and very quickly got a good trade offer for a Kenwood TS-590sg. I have always wanted one of those. A nice simple radio that is robust and easy to operate. I am going to add it to my field radio collection.
Some of you know I have a penchant for operating big radios at low power. I don’t have to worry about overheating and I like that the controls I use most are easy to get to. Most of the time my field work is either in my micro camper or at a nearby park picnic table. Weight is not an issue. I normally operate at about 20 watts. Sometimes as high as 30-35 depending on band conditions. I don’t need more than that.
My adventure starts Friday afternoon as I head towards Indiana. I’ll stop somewhere for the night around dark and then pick it up the next day. I plan on stopping at a park in Ohio and then a park in Indiana to add those two to my activation list. Michigan, another needed State is nearby and I hope to add that one to the list. From there I will generally head east and see what mischief I can get into.
Gear for the trip was my IC-7300 and LDG tuner. The antenna was a Chameleon 17’ stainless steel whip and a Chameleon CHA Hybrid Micro Balun sitting on top of a carbon fiber tripod. Counterpoise was a Chameleon wire with about 20-22’ used. Since this was a shoot and scoot trip I used FT8 with my Lenovo T14 Thinkpad. I brought a 100 amp/hr LiPo battery for the radio with a Bioenno BPP-160 for the laptop. I ran the radio from the backseat and the laptop on the center console from the drivers seat. Setup and teardown only took a few minutes. I collapsed the antenna and stuck it in the back seat when I was done. Slam, Bam, Thankyou Ma’am.
Friday night I stopped in Lexington KY, for the night and I was on the road by 6 AM the next morning. My fist stop was Lake Laramie State Park in Minster, OH. The GPS put me at the back of the park and I had a nice clearing by the lake to myself. It took a while to get my 15 contacts ( I always get spares). Band conditions were up and down like a roller coaster. After working out a few kinks to my setup, I packed up and headed toward Indiana. The trip was mostly county roads and highways. The scenery was beautiful passed through farmland with corn as far as the eye can see. I also passed through some Amish communities and was treated to traditional horse and buggies on the road.
My next Park was Ouabache State Park in Bluffton, IN. I found a little spot in a picnic area and set up shop. Again, the band conditions were not that good and I was glad I was running FT8. After completing my contacts, I packed up and headed for New Haven, IN were my trade was to take place. I arrived on time and after chatting with my trading partner we were both satisfied with the trade and once again I was on the road heading toward Michigan.
Coldwater State Park is a hunting preserve. When I got there, there was no infrastructure. Just a parking area and bulletin board. I was alone and in about an hour I was on the road again.
This was leg of the trip was a long one. I spent the night in Zanesville, OH and the next morning found me heading for southwestern Pennsylvania. The park I chose was Ryerson Station State Park. This park was nestled in the Allegheny Mountains with twisty-turney, uppy-downy roads both into and out of the area. There was no cell service for miles. It took me a little longer to get my contacts but I succeeded. From there is was a short hop to Picketts Fort State Park in Fairmont, West Virginia. This was a nice park and I found a shaded spot in a picnic area. This was a hot weekend and at some of the parks, I operated with the A/C running. At Picketts, I rolled down the windows.
Leaving Picketts, it was a long haul to Hungry Mother State Park in Marion Virginia. This park while still being in the mountains was more open and the contacts came easier. From there I drove to Statesville, North Carolina and spent the night. The next morning I was up early and drove 8 miles to Lake Norman State Park, my shortest hop. I found a spot down by the lake and made my contacts fairly quickly. Back on the road for the last 5 hour drive back to the home QTH.
I now have activated 17 States. I was a fast and fun trip but while my mind was willing, the body not so much. At 68 it’s probably time to start slowing down a bit. I am at the point where to activate a new state it is a one to two day drive just to get there.
So why is the FTX1 leaving? To start off with, it is not a bad radio. I have two other small radios, an IC-705 and a KX2. Between the FTX1 and IC-705, my preference is for the 705. It is more in line with the way I operate. Plus, as I have said earlier, I mostly use big radios so having 3 small radios is a bit superfluous. The FTX1 is off to a new home and I get another big radio for the field.
When I got home, I did hook the TS-590sg up and played around for a few minutes. The radio is easy to use and on CW the relays are super quiet. The controls are fairly intuitive and easy to use. I am going to bring this radio on my next outing. Over the next couple of days, I will go over it and set it up to my liking. Don’t forget to check out my video, and thanks for stopping by. 73 de Scott
KK4Z 