The Radio Flyer is an excellent camper for me. I love the compactness as well as the space utilization. One of my jobs in the U.S. Army was as a crew chief on a Blackhawk Helicopter. It has a similar vibe. the other thing I like about it, is I only lose 0.5 to 1.5 miles per gallon when I tow it.
The first weekend in it was great. I learned a lot about the camper and worked on how best to use the space. Winter is upon us so operating the radios outside may not always be doable. Years of abuse working in the trades have left me with arthritis in my hands, making CW difficult when it is cold. In my last post, I tried a couple of different ways to operate inside the camper. while none were perfect, I got a couple of good ideas. This is what I ended up with.
I can sit comfortably in that chair for hours and there is enough room for my legs. The table is 16″ wide and 3′ long. It can easily hold my laptop, CW key, and full-sized radio. Not shown, but on the right, just behind the chair are 2-120v outlets. If I need to get up, I slide the table over to the wall on the left. I believe I can also sleep with it there.
Construction was simple. I have about $50 invested, $30 was for the legs. The table-top was a project panel from Lowes that cost less than $11. Everything else I had on hand. I cut a radius on the corners and routed the edges for comfort. To secure the legs to the table I used some Tee-nuts left over from a prior project.
The panel is only 5/8″ thick. The tees are about 1/2″ tall so the recess was rather shallow. After I put them in, I secured them with JB Weld. Not pretty, but adequate for the job and good enough for proof of concept. If I decide to redo this, I would use a thicker board and a Forstner Bit for the recess. That would have upped the cost, more than I thought appropriate for a first go.
I did both ends as I have two legs. that way I can also set it up as a table proper. I sanded it a little, put on a coat of stain, and a spray-on polyurethane clear coat. Nothing fancy. To store the table when I am not using it I put it between the bed and the camper wall.
The other kink has to do with my microwave. It sits nicely on the shelf; however, during the first tow, I went over some fair-sized bumps, which launched the microwave onto the floor. The netting that came with the camper did not hold it well enough. My cure was simple, I did two things. First I turned the hook that holds the net around to where the hook faces the microwave. This should increase the holding power. The second thing I did was I bought some metal bookends and slipped them under the microwave and behind the hooks. The height of the bookends and the weight of the microwave should keep it on the shelf.
The next flight of the Radio Flyer will be in a couple of weeks. Hopefully, everything will work as advertised. 73 — Scott