POTA Activation Flag Mountain, AL

I consider my home park to be Talladega National Forest. It’s the closest park time wise and because it is so large, it offers many opportunities for activation. One of the things I enjoy is the feeling of remoteness driving down those forest service roads. This past Friday (11/26), I decided to try a new spot. It was on Flag Mountain. There is nothing there except woods and the road.

For me, any park activation means about an hour drive each way which eats up a lot of my POTA time. For this activation, I wanted to try an in-truck cab solution to help reduce the set-up time. Since I would probably be along the side a one lane dirt road, it would be safer. As a bonus, I would stay warmer as the temps were in the 40’s throughout the day. This bushwhack style of operation turned out to be fun and gives me more flexibility to work different parts of the National Forest.

Equipment. To be able to bushwhack, I needed a space to operate from when sitting in my truck. I came up with a rather simple arrangement that I built in a couple of hours. It’s a flight deck that sits on top of my center console.

It’s a couple of 2×6’s and a piece of 3/8 plywood that I had laying around. It takes about 10 seconds to install and It is small enough to stay in the truck. In use it looks like this:

It was very stable. I even had my coffee cup on the free standing end and it didn’t tip over. It was very comfortable to use. On the flight deck you see my Rite-in-the-Rain notebook, Begali Traveler Light, and K1EL keyer. I will talk about the paddles and keyer in another post.

The radio was my trusted IC-7300. I normally like to bring one of my QRP radios, but next weekend we rented a cabin at Ft Mountain State Park and I want to try to make some CW 160 meter contacts. My thinking is I may need a little extra power. Next to the radio is a 20 amp/hr Bioenno Battery and next to it, is a LDG Z-11 Pro. On top of the radio is a windshield sunscreen to help keep the radio cool.

The antenna is my Frankentenna. It starts with a MePhoto camera tripod, a home made 3/8-16 to 3/8-24 thread adapter, Chameleon Micro Matching Unit, a Buddipole 7 section lightweight shock-corded whip antenna (12′), and a Chameleon CHA 60′ extra wire. It was fed with 18′ of RG-8x.

Operation. I operated CW with 35 watts. I set my code speed at 16 wpm. I can copy faster, but I find during an activation, slowing down makes it a little easier for me. My hearing is not that good, I do the best I can. How did it do? Very well I think. I was able to work stations from Alaska to France. All in all I made about 42 contacts in a couple of hours time. Here is a QSOMap (I need to get better at these).

Here is a short YouTube video of the activation.

It was a fun half a day. I learned a few thing like wear headphones/earbuds to help with my hearing. Overall, I enjoyed the bushwhack style of operating as it gives me more options for operating out in the wilds. I plan on doing more of this style of activating along with more traditional parks. 73

2 thoughts on “POTA Activation Flag Mountain, AL”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: