Tag: aclog

Hamrs Pro

This past trip I was able to check out the new Hamrs Pro app. I must say I am impressed. I spent some time prior to my trip setting it up for a POTA activation. Here is my current setup:

Hamrs uses FLrig to interface the radio with the app. When the radio is connected, frequency, band, mode, and power is updated in the app. In addition, Hamrs Pro will set the RST to either 59 or 599 depending on the mode. Another nicety is when you add the POTA park number in “My Park” it will automatically add the Maidenhead Gridsquare to “My Grid”.

Tabbing is straight forward. It goes from left to right and top to bottom. In my set up I have received RST first since that is the first one I get and then a quick tab and I add mine. Time on is automatic. I always believed that computers should work for us and not the other way around. With Hamrs Pro, it does most of the heavy lifting for you.

Another place where Hamrs Pro shines is the POTA spots.

There is a lot of info on the page to include compass heading and distance. If you click on the RIG button, Hamrs Pro transfers the frequency and mode to your radio. If you click the Copy button, the information is copied into the log. Add RST, hit save and you’re done. Pretty slick.

So far the only improvement I can think of is using Hamrs Pro with FT8. I don’t see an easy way to interface Hamrs with WSJT. This is not a big deal. All I do is log FT8 contacts in ACLog export the log as an ADIF, and then import the ADIF into Hamrs. It is easier than it sounds. Another way might be to use the WSJT log function and import that into Hamrs Pro.

Hamrs Pro with a $2 a month subscription allows you to sync your logs across platforms. I have Hamrs Pro on my Mac, IOS, IPadOS, and Windows. As along as I have internet or WiFi, they sync. This is great because I mainly use Windows for radio stuff and Apple for everything else. I can create a log on my Evolve III or my iPhone, and when I get home I can upload the log to POTA on my Mac — easy peazy.

I have been using Hamrs on and off since the beginning. This is a hugh step –in the right direction. I can see this as becoming my go to logging app. A lot of thinking and work has gone into Hamrs Pro. I can only see it getting better. Good job Hamrs folks. de – Scott

Field Day 2023

This weekend I got to participate with my local amateur radio club, the West Georgia Amateur Radio Society (WGARS) for Field Day. This is a great club and every event is fun. It covers a wide variety of activities, including Parks on the Air, Fox Hunts, Balloon releases, Field Day, and Winter Field Day. This year, Field Day was held at the Little Tallapoosa Park located in Carroll County Georgia. We operated as W4F, 5A GA. We did not operate 5 stations all of the time, we padded the number to allow members to bring their own rigs and operate for a short time if they desire.

I decided to make a night of it and brought my micro camper. Because I was in a group setting I set my radio up outside as there were plenty of folks to keep an eye on each other’s equipment. My original intent was to operate FT8 and CW. I have a newly acquired Elecraft K3/10 I wanted to try. However, band conditions were poor, so I relied on my IC-7300 and FT8. The club president tried CW and only made 2 contacts.

Everything worked well. The only glitch was a software one. We networked our computers together with N3FJP’s AcLog for Field Day. The glitch was with the CQ message. I set mine up for CQ FD W4F EM73. It would stay that way until I clicked on an incoming message (red). The FD would change to PACC on its own. I would have to change it back to FD before calling CQ.

I know this wasn’t isolated as I saw other stations from other groups calling CQ PACC. I had to keep an eye on it the whole time I was operating.

How did we do? I think we did okay. Our group is a little more casual than others but, by the time I left by mid-morning Sunday, we were north of 500 contacts. Here is a club QSO map.

I had a good run. I mainly ran FT8 on 20 meters. I ended up with 200 contacts from 38 states and 4 DX entities. The most fun came in the wee hours of the morning when there are DX openings to the west. I was able to make two contacts with Alaska and one with Hawaii. also about the same time I managed a contact to Italy. I didn’t hit the sack until 0400 hrs Eastern.

I was up at 0700 hrs to make the last few contacts. I wanted to pack up a little early before the heat of the day. I had a breakfast of eggs, bacon, OJ, and a pancake in a cup before heading home.

It was a lot of fun. I enjoy field operating and seeing how well my equipment does. What better way to spend a weekend than with friends and fellow amateur radio operators. Below is a short video about the event. 73 – Scott